Monarch 10EE
MACHINE INFORMATION
Up for pre-sale is a Monarch 10ee tool room lathe. These lathes are regarded as the best tool
room lathe in the world. They were typically purchased buy the U.S. government and large
corporations for their high accuracy, repeatability and stability. Monarch is still in business
today in the same facility and still carry original parts and manuals. They started building 10ee’s
in 1939 and still build them today on the same casting.
room lathe in the world. They were typically purchased buy the U.S. government and large
corporations for their high accuracy, repeatability and stability. Monarch is still in business
today in the same facility and still carry original parts and manuals. They started building 10ee’s
in 1939 and still build them today on the same casting.
These machines have been meticulously gone through with every part being cleaned and
inspected and replaced when necessary. The castings are sandblasted and recoated with a
catalyzed paint and are lightly textured with a 25% sheen. They are reassembled with stainless
steel fasteners and pins. All bright work is polished and decorative chrome plated. All new
electrics and electronics are install. Interior of machine is coated with a rubberized durable
coating in cream color.
inspected and replaced when necessary. The castings are sandblasted and recoated with a
catalyzed paint and are lightly textured with a 25% sheen. They are reassembled with stainless
steel fasteners and pins. All bright work is polished and decorative chrome plated. All new
electrics and electronics are install. Interior of machine is coated with a rubberized durable
coating in cream color.
| Price | $65,000 |
| Manufacturer | Monarch |
| Machine Model | 10EE |
| Swing Over Bed | 12.5" |
| Swing Over Crosslide | 7.5" |
| Distance Between Centers | 20" |
| Bed Width | 10.5" |
| Leadscrew Diameter | 1" |
| Threads Per Inch | 8TPI |
| Range of Threads | 3 to 184 |
| Number of Thread Changes | 60 |
| Hole Through Spindle | 1.406" |
| Tailstock Spindle Diameter | 1.75" |
| Tailstock Travel | 3.5" |
| Machine Updates | Round dial machine is generally 3000RPM |
| Square dial machine is generally 4000RPM |
*Machine specifications are general. Not all machines will meet specifications *
The machine comes with the following:
- Fully reconditioned machine coated in the color of your choice.
- Fully coated interior of machine in Cream color
- 2 axis digital readout with custom built mounting bracket with (2) 120 volt outlets
- 3 phase 5 hp. Inverter rated motor
- Variable frequency drive matched to motor with potentiometer (speeds will be based on original tachometer)
- One power cord of 3 phase 220 volt provides all power needs
- 24 volt DC power supply
- 120 volt transformer
- Coolant pump with on/off switch
- Lighted emergency stop switch
- Drum switch for on/off/stop operated by original lever
- D1-3 Scroll type collet chuck
- D1-3 manual 3 jaw chuck
- D1-3 manual 4 jaw chuck
- MT-2 live center
- MT-2 drill chuck
- 1 set of 5c collets with custom built wall rack
- 3 point leveling pads
- Bound copy of original manual from Monarch
- Small bottle of touch up paint and catalyst with aerosol sprayer
- Blanket wrapping, stretch wrapping and crating
are not only functional but, are also a work of art unlike any machines built today and are made
to last.
Pre-sale terms are as follows:
- Estimated delivery is 6 months at time of order.
- 33.3% non refundable deposit is required at time of order unless a machine cannot be
- acquired.
- 33.3% non refundable payment 90 days after time of order.
- Final payment prior to shipping.
- Prior to shipping a video will be sent showing and hearing machine in operation.
If you have your own Monarch 10 EE, it can be sent in for refurbishment at a reduced price.
*Pictured machine is not the actual machine for sale. Refurbished machine may be either a round dial or square dial.
NEED A QUOTE OR HAVE GENERAL QUESTIONS?
Please contact Mike Russell (815)704-7878 or
fill out your contact information and one of our team members will reach out.
