CD Automation | CD3000S | Thyristor

From 10A to 90A. Voltage power supply: 24V min, 480V Max, 600V on request. Input Signal: SSR (OFF state <1Vdc ON = 4·30 Vdc) is standard up to 90A included. Analog input 4·20mA and 0·10V is available from 35A (included) to 90A (included). Firing: Zero crossing ZC; Burst Firing 4/8/16 with 4·20mA or 0·10V with 12·24V aux. power supply.. Fan Voltage: 230V ± 15% standard f(110V on request opt., if current 75A). Heater Break Alarm: Discrimination better than 20%. Circuit microprocessor based to diagnose partial or total load failure and short circuit on Thyristor. Latching alarm plus reset. Relay output 1A at 230V. Automatic calibration of one or more unit at the same time using a dedicated digital input or using for each unit the calibration button. Approvals: Comply with EMC; culus available as an option on basic units. Mounting: Din rail mounting up to 90A included. Operating Temperature: 0·40° up to 90A included (for higher temperature see the derating curve).